Cub Scout Pack 46
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
PineWood Derby March 30,2008 Jackson School, 1:30
ALL CARS MUST PASS INSPECTION TO QUALIFY FOR THE RACE
Following are the inspection points
1. The car weight shall not exceed 5.0 ounces. The official race scale
shall be considered final.
2. The overall length of the car shall not exceed 7 inches.
3. The overall width of the car shall not exceed 2 ¾ inches.
4. The car must have 1 ¾” clearance between the wheels.
5. The car must have 3/8” clearance underneath the body.
6. The wood provided in the kit must be used. The block may be shaped
any way that is desired.
7. The wheels supplied with the kit must be used. The wheels may not be
cut, drilled, beveled or rounded. You may remove the seam from the
wheels.
8. The axles supplied with the kit must be used. They may be polished
or lubricated.
9. Wheel bearings, washers or bushings are prohibited.
10. The car must not ride on any type of springs.
11. The car must be freewheeling, with no starting devices.
12. No loose material of any kind, such as lead shot, may be used.
13 Not number your car, we need to put a number on for tracking the
car in the race
Each car must pass inspection by the official inspection committee
before it will be allowed to compete.
The Inspection Committee has the responsibility to disqualify those
cars that do not meet these specifications.
Car weigh in will be March 15 and March 22 1-3 at Mr Bannon's house 15
Cliff Dr, off or Walnut St.
There is a $5 adult class others can join.
For the Adult group there is no restriction on the weight, axles, or
wheels
ALL CARS MUST PASS INSPECTION TO QUALIFY FOR THE RACE
Following are the inspection points
1. The car weight shall not exceed 5.0 ounces. The official race scale
shall be considered final.
2. The overall length of the car shall not exceed 7 inches.
3. The overall width of the car shall not exceed 2 ¾ inches.
4. The car must have 1 ¾” clearance between the wheels.
5. The car must have 3/8” clearance underneath the body.
6. The wood provided in the kit must be used. The block may be shaped
any way that is desired.
7. The wheels supplied with the kit must be used. The wheels may not be
cut, drilled, beveled or rounded. You may remove the seam from the
wheels.
8. The axles supplied with the kit must be used. They may be polished
or lubricated.
9. Wheel bearings, washers or bushings are prohibited.
10. The car must not ride on any type of springs.
11. The car must be freewheeling, with no starting devices.
12. No loose material of any kind, such as lead shot, may be used.
13 Not number your car, we need to put a number on for tracking the
car in the race
Each car must pass inspection by the official inspection committee
before it will be allowed to compete.
The Inspection Committee has the responsibility to disqualify those
cars that do not meet these specifications.
Car weigh in will be March 15 and March 22 1-3 at Mr Bannon's house 15
Cliff Dr, off or Walnut St.
There is a $5 adult class others can join.
For the Adult group there is no restriction on the weight, axles, or
wheels
